- Details
- Category: Radiation Protection
- Hits: 28
| Overview |
|
![]() |
![]() |
![]() |
![]() |
|
| Shielding Elements to MB-500 Mössbauer Bench |
Source Gripper and Source Depository |
Overall Shielding |
Radiation Protection Safe | Shielding materials |
|
The radioactive source in the center of a Mössbauer spectrometer has normally a high activity which can cause essential damage to the health of the users or other persons sojourning in its near. This can happen even if these persons stay outside the Mössbauer laboratory. Due to this reason the Mössbauers source has to be shielded with a great care Attention has to be paid also to the fact, that sources may emit besides the radiation of the Mössbauer transition also further γ-lines of higher energies, which may be essentially less shielded than the Mössbauer line.
The mechanical set-up of a WissEl Mössbauer spectrometer, the Mössbauer Bench, has a basic source shield that protects the user when he or she is just working for a short while at the Mössbauer Bench, but it should be completed by an overall shielding round the bench as shown under the menu point 'Overall Shielding'. An efficient overall shielding is necessary particularly in those cases where persons work permanently in the near of the Mössbauer spectrometer.
In addition to the mentioned basic source shielding, delivered with the Mössbauer Bench, further optional shielding elements can be mounted, closing nearly all gaps, through which the radiation of the Mössbauer source could escape and hit persons.
Special shieldings, designed for the individual requirements of a Mössbauer laboratory, can be delivered on request. |
||||
- Details
- Category: Radiation Protection
- Hits: 24
| Radiation Protection Devices |
|
| Source Gripper | ||
|
|
|
| The front part of the source gripper has three claws for holding the source. The operating wheel is located at the rear of the device. |
Front part of the source gripper |
|
|
The source gripper is used to take the source out of its lead container and to screw it on the source adapter, attached to the velocity transducer, without touching the source by hand. The length of about 380 mm provides a safe distance from the source when handling it. Furthermore there is a shielding which is in front of the source when it is gripped. Specifications:
|
||
| Source Depository | ||
![]() |
||
|
Lead container |
|
|
| The souce depository is an insert for the lead container, made of foamed plastic. It holds the source in such a way that it can easily taken out by the source gripper. |
||
- Details
- Category: Radiation Protection
- Hits: 44
Radiation Protection Devices
WissEl offers radiation protection equipment for safe handling of radioactive sources.
| Product | Radiation Protection Safe | ![]() Shielding Elements |
![]() Shielding Materials |
|---|---|---|---|
| Type | Storage Safe | Lead Elements | Lead Bricks |
| Application | Source storage | Beam shielding | Custom shielding |
- Details
- Category: Radiation Protection
- Hits: 27
Radiation Protection Safe

The Radiation Protection Safe provides secure storage for Mossbauer sources when not in use. It is designed to minimize radiation exposure and comply with safety regulations.
Features
- Lead-lined construction for effective radiation shielding
- Secure locking mechanism
- Compact design for laboratory use
- Suitable for various source activities
- Easy source insertion and retrieval
Technical Specifications
| Shielding material | Lead |
| Wall thickness | Sufficient for source activities up to 100 mCi |
| Capacity | Multiple source holders |
- Details
- Category: Radiation Protection
- Hits: 29
Shielding Elements to MB-500
Shielding elements for the MB-500 Mossbauer bench provide radiation protection during measurements. These components are designed to integrate seamlessly with the MB-500 system.
Available Components
- Source Screening - Shields the source during measurements
- Absorber Screening - Protects the sample area
- Detector Screening - Additional shielding for the detector
- Sandwich Screening - Combined shielding solution
Features
- Lead construction for effective shielding
- Easy mounting on MB-500 optical track
- Adjustable positions
- Compatible with all MB-500 configurations








